SUPA is built to last and uses high-quality components throughout. Whether you are heating water through recirculation in Mode 1 or where a direct hot tub fill straight from the mains is being adopted in Mode 2, both the heater and the pump have been designed to offer 90 minutes of continuous use before needing a short 15 minute ‘rest break’ between cycles, allowing the pump motor to cool and to ensure the heater is not left to run indefinitely when unobserved by accident. Typical short operating cycles of around 60 minutes, sufficient to heat a 4-person hot tub (allowing 250 litres per user) from 20-38°C, can be achieved multiple times during a change-over for holiday homes or lets from a single SUPA.

SUPA has been designed to heat hot tubs up to 1,700 litres from 20 – 40°C in under 90 minutes, that is a very well-proportioned hot tub for 6-7 users and something previously unheard of from any other heating system. Whilst we do not recommend the use of SUPA for swimming pools, small above ground pools and swim spas of 4,250 litres or less, could be heated from 20 – 28°C by SUPA in 90 minutes. Watch this space and subscribe to hear of the latest news on one of our highly anticipated and market-changing developments, the SUPA XL, which will be able to heat a swim spa or above ground pool of 8,000 litres from 20 – 28°C in under 90 minutes.

Absolutely, you can use the benefits of hot water cleaning to get your tubs gleaming! In Mode 2, just attach your mains hose pipe into the front of the pump using a ‘Hozelock’ type quick-fit connector and attach our shower head or a pressure washer using the fast fitting on the outlet of the red ‘hot’ hose. Set the temperature you want in Mode 2 (typically below 40°C for pressure washers) and switch on the mains water – hey presto, instant hot water to help melt any grime away ensuring your hot tubs stay squeaky clean and inviting for each new guest.

Also, try using a pressure-washer with hot water to remove slippery moss from wooden decking and paving – it does the job to perfection! Or try melting snow and ice on slippery paths before using rock salt to ensure it doesn’t freeze over again, SUPA can really help in all sorts of previously unheard of ways.

A SUPA heater simplifies your changeover days by swiftly heating your hot tubs in around an hour, something owners and operators know all too well has previously been the luxury of the major park owners with expansive boilers and hot water on tap. SUPA allows you and your team, however small, to efficiently prepare tubs for the next guests, reducing downtime and ensuring a warm and welcoming experience for arriving visitors every time.

After all the effort you put in as owners, getting the accommodation perfect for every arrival, SUPA heater ensures they enjoy a ‘hot’ tub and not just a ‘warm’ tub at check-in, helping you to retain those hard earned 4 and 5-star ratings you and your team have worked long and hard for.

For those of you with wood-fired hot tubs, its even better as you do not have to keep refilling the wood burner every 20 minutes for up to 4 hrs per changeover day, saving you a tremendous amount of time to do something more productive or relaxing!

And finally, SUPA quick changeovers allow you to get more occupancy, renting when you wouldn’t normally be able to due to time constraints and maximising revenue from your assets.